ENP High-Quality Engineering Cases (III): Expanding Global Markets with Superior Quality

ENP Engineering Atlas（三）

Mapletree Guangzhou International Intelligent Food Production Base & South China Supply Chain Procurement and Distribution Center is invested by Singapore-headquartered, Asia-focused Mapletree Group, a real estate developer, investor and capital manager. Located in Zengcheng District of Guangzhou, the project has a total investment of 3 billion yuan and covers a total floor area of approximately 390,000 square meters. It ranks as one of Mapletree Group's largest logistics real estate investments in China, aiming to develop an integrated production base featuring fresh food cold chain warehousing, processing and packaging, as well as product distribution. Having supplied over 2,000 tons of Yieh Phui (China) Aluminum Zinc coated steel and prepainted steel for this project. ENP has not only underpinned the project's smooth execution, but also demonstrated its strong capabilities in penetrating the logistics real estate market.

As a key project in Changshu High-tech Zone, it has a total investment of 10 billion yuan and the intelligent factory covers an area of approximately 741 mu. The designed annual production capacity of Phase I is about 10 GWh. The main structure of the project has been officially capped. ENP has supplied around 1000 tons of Yieh Phui (China) Aluminum Zinc coated steel and prepainted steel for the project.

The designed annual production capacity of the Phase 2 Factory is approximately 15 GWh. The construction is expected to break ground in December 2025. This project demonstrates both ENP's market expansion in the new energy sector and the strong support of product quality for project construction.

For the Sika Switzerland New Materials Dushan Port Project, the Sika was founded in 1910, with its global headquarters located in Zurich, Switzerland. Listed on the SIX Swiss Exchange in 1968, it is a world-leading specialty chemicals company.

This project is located in Zhejiang Dushan Port Economic Development Zone, covering an area of approximately 100 mu with a total investment of around 100 million US dollars. Upon completion, it will become Sika's largest production base in China. The design institute for the project is China Haisum Engineering Co., Ltd. ENP has supplied about 600 tons of Yieh Phui (China) prepainted steel. Its high-quality products support the construction of this important chemical project, demonstrating the company's market penetration in the chemical sector.

Founded in 1904 and headquartered in Copenhagen, Denmark, Maersk Group operates in 135 countries worldwide. Its Lingang Flagship Warehouse Project, located in the Lingang New Area of Pudong New District, covers a total floor area of approximately 191,745.40 square meters with an investment exceeding 1 billion yuan. It comprises four logistics warehouses, an elevated automated warehouse, loading and unloading platforms, a complex building and supporting facilities. The project has secured a supply of approximately 1500 tons of Yieh Phui (China) products from ENP Industrial.

GWM's Tianjin Mandao Project, with a total investment of 1.153 billion yuan and a land area of about 100,000 square meters, it will add two factories for optoelectronics and automotive thermal management systems, boasting a planned annual capacity of 400,000 units. Slated for completion and commissioning in 2025, it is expected to create 1,200-1,400 jobs and generate an annual output value of around 3 billion yuan. A total of over 1200 tons of Yieh Phui (China) prepainted steel, contributing to the smooth implementation of this automobile manufacturing-related project.

Invested by Guangdong Highinnova International Supply Chain Co., Ltd., the project sits in the Aviation Logistics Park of Mingcheng Town, Gaoming District, Foshan City. With a total investment of 1.2 billion yuan and a construction area exceeding 200,000 square meters, it will be a one-stop industrial park for the textile and garment industry, integrating cross-border commodity trading, cross-border supply services, supply chain management, and warehousing & distribution. A total of about 1500 tons of Yieh Phui (China) Aluminum Zinc coated steel and prepainted steel have been used for this project.

With a total investment of 1.5 billion yuan, this Project is situated in Longsheng New City, Liangjiang New Area of Chongqing, covering a total land area of 91,263 square meters. It is planned to be constructed into Master Kong (Chongqing) Drinking Water Factory, which will alleviate the tight production capacity of tea beverages and fruit drinks in Chongqing. A total of approximately 1,000 tons of Yieh Phui (China) products have been adopted for this project.

With a total investment of 1.8 billion yuan, the project boasts a robust planned production capacity, including a stock of 1.2 million breeding chickens, an annual output of 100 million commercial broilers, an annual feed production capacity of 800,000 tons and an annual broiler slaughter capacity of 100 million. ENP has supplied a total of over 1,350 tons of Yieh Phui (China) zinc-aluminum-magnesium coated steel and prepainted steel, fully demonstrating its product strength and market expansion capabilities in the agricultural industrialization sector.

Undertaken by China Coal Construction Group, the Coal Handling System Project of Huaneng Nantong (Tongzhou Bay) 2×1,000 MW Clean & High-efficiency Coal-fired Power Plant is located north of the east bank of Basin 1, Tongzhou Bay. It includes 2×1,000 MW double-reheat ultra-supercritical units, environmental protection facilities (desulfurization, denitrification, etc.) and a 50,000-ton auxiliary wharf. ENP has supplied a total of over 1,500 tons of Yieh Phui (China) prepainted steel, further consolidating its market position in the energy and power sector.

Guosen Shazhou's 2×1 million-kilowatt unit expansion project is a key clean, efficient power project under Jiangsu's "establish the new before abolishing the old" initiative and a vital energy guarantee for the Yangtze River Delta integration. With a dynamic investment of 8.24 billion yuan, it is scheduled for grid connection by late 2025. Post-commissioning, it will generate 10 billion kWh annually, feeding power directly into the Southern Jiangsu Power Grid for local consumption and easing cross-region transmission pressure. Over 1500 tons of Yieh Phui (China) prepainted steel have been deployed for the project.

ENP's products have earned remarkable recognition domestically and secured a prominent standing internationally, going on to underpin the construction of a multitude of large-scale global projects. Gotion High-tech's 20GWh power battery plant project in Morocco is located in the Kenitra Atlantic Free Trade Zone of Morocco. Covering an area of approximately 100 hectares (1,500 mu) with an investment of 12.8 billion Moroccan Dirhams (about 9.3 billion Chinese Yuan), it is Africa's first large-scale electric vehicle battery plant, marking Morocco's official entry into the era of advanced energy industry.

Phase 1 has a planned annual capacity of 20GWh, with a subsequent expansion target of 40GWh. It is expected to be officially put into operation in the third quarter of 2026, mainly targeting the European market, especially Germany and France, which plan to completely ban the sale of fuel-powered vehicles by 2035. ENP has supplied over 1,200 tons of Yieh Phui (China) prepainted steel, highlighting its progress in the international new energy market and global recognition for its product quality.

The Baimskaya Copper Mine in Chukotka, Russian Far East, holds 23 million tons of copper resources, accounting for 3% of the world's proven copper reserves. With Arctic permafrost drilling underway, development has commenced. In 2025, Vnesheconombank (VEB) announced a $13.4 billion investment in the mine—Russia's largest mining investment in a decade. Once completed, the project will boost Russia's copper output by 25%, challenging market positions of Chile, Peru and other major producers. To date, approximately 1,500 tons of Yieh Phui (China) prepainted steel have been used for this project.

These project cases fully demonstrate ENP's remarkable achievements in market expansion. Ranging from various domestic industries to major international projects, the company's products have gained widespread recognition for their superior quality. ENP will continue to uphold the principle of superior quality, expand its market presence and provide strong support for more key domestic and international projects to create greater value.